Short disc carrier

Short disc carrier

Short disc carrier for BLE edger

The short disc holder on a BLE edger refers to a part that plays a crucial role in the machine's sanding system.

Here is its general role and some indication of when it may be necessary to change this part:

1. Abrasive disc holder: The short disc holder is a component that supports and holds in place the abrasive disc used for sanding wood. It ensures the stability of the disc while allowing its rotary movement during the operation of the edger.

2. Stability and adjustment: This part helps to maintain the stability of the sanding disc during sanding. It can also be designed to allow adjustments to position the disc optimally in relation to the surface to be sanded.

3. When to change the short disc holder :

   - Wear: If the short disc holder shows signs of wear such as cracks, deformation, or a reduction in its ability to hold the disc in place, it may need to be replaced.

- Serious damage: Significant damage, such as fractures or breaks, may compromise the stability of the holder and require replacement.

   - Excessive play: Excessive play in the short disc holder can affect sanding accuracy. If you observe abnormal play or unwanted movement, consider replacing the part.

It is recommended that you consult the Repe Floor manufacturer for your model of BLE edger for precise information on maintenance, replacement and adjustment of the Short Disc Holder. 

In general, regular maintenance, visual inspection and replacement of worn parts will help to ensure that the edger works properly and lasts longer. If you have any doubts about the condition of the short disc holder or if you are experiencing sanding problems, it is advisable to contact the after-sales service for advice specific to your model.

Non contractual photo 📷
Please note that the photos of the parts do not use the same scale.