Long disc carrier

Long disc carrier

Long disc carrier for edger BLE ORIGINALE 

35 CM

The term "long disc holder" in the context of a BLE ORIGINALE edger refers to a part of the machine that is used to support or hold the abrasive disc used to sand the floor.

The elongated size allows access to less accessible areas. 

Here is its general role and some indication of when it may be necessary to change this part:

1. Sanding disc holder: The long disc holder acts as a support for the sanding disc used in the parquet sanding process. It holds the disc in place and allows it to rotate while the edger is running.

2. Adjustment and positioning: Depending on the specific design of the BLE ORIGINALE edger, the long disc holder can also be used to adjust the position of the abrasive disc in relation to the parquet surface, thus ensuring efficient and uniform sanding.

3. When to change the long disc holder :

   - Wear: If the long disc holder shows signs of wear such as cracks, deformation or reduced ability to hold the disc in place, it may need to be replaced.

- Serious damage: Significant damage, such as fractures or breaks, may compromise the stability of the holder and require replacement.

   - Excessive play: Excessive play in the long disc holder can affect sanding accuracy. If you observe abnormal play or unwanted movement, consider replacing the part.

It is important to consult the user manual for your ORIGINALE BLE edgebander for specific information on maintenance, replacement and adjustment of the long disc holder. The manufacturer's recommendations may vary depending on the model and design of the machine.

In general, regular maintenance, visual inspection and replacement of worn parts will help to keep your edger running smoothly and prolong its life. If you have any doubts about the condition of the long disc holder or are experiencing sanding problems, it is advisable to contact the manufacturer's after-sales service for advice specific to your model.

Non contractual photo 📷
Please note that the photos of the parts do not use the same scale.