Fast-curing repair resin MS335 0.6KG
Fast-curing repair resin MS335 0.6KG in metal pot
Fields of application
MS 335 repair resin is a fast-curing modified silane resin designed to fill cavities in parquet floors, regardless of the type of parquet adhesive used.
Technical characteristics
- Raw material base: Modified silane polymer
- Pot life: approx. 15 - 20 minutes
- Hardening time: approx. 2 hours
- Storage temperature: frost resistant
- Storage time: 12 months at room temperature
Application
1. Locate the cavities and apply a sufficient quantity of resin around the drilling point to avoid soiling the surface.
2. Drill the cavity plumb, making additional holes if necessary.
3. Add 50 ml of water to 600 ml of MS 335 and mix with a small mixer for at least one minute to obtain a homogeneous mass.
4. Inject the mixture into the cavity during the pot life of 15 - 20 minutes until it is sufficiently full.
5. Leave to dry for approximately 2 hours. Once this period has elapsed, the hole can be properly filled using the usual methods.
Important instructions for use
- Do not use at floor temperatures below +15°C or at ambient temperatures below +18°C.
- Maintain an indoor humidity level of between 40% and 65%, but not more than 75%.
- Pre-warm products in a heated room before use in cold weather.
If you have any further technical questions, please do not hesitate to contact us.
Manufacturer's leaflet
Non-contractual photo 📷
Please note that the photos of the parts do not use the same scale.