» Oil Hardener 0.5L

Types of application

Wood

Oil Hardener 0.5L

Reference -BL02102893

Rating:0 opinion

74.49€ Excluding VAT

Oil Hardener 0.5L BL02102893

Quantity :

Product available

Add to cart

Ask an estimate

E-mail

Oil Hardener 0.5L

Notice

Oil Hardener 0.5L

Oil Hardener 0.5L: an additive to improve finishing oils

Oil Hardener 0.5L is an additive designed to enhance the effectiveness of finishing oils used on indoor wood floors and woodwork. It helps speed up drying, harden the protective film and prolong the durability of the treatment. These properties are particularly useful in areas subject to frequent or intensive use, such as public or commercial spaces.

Dosages adapted to different oils

This hardener is used in combination with various wood protection oils. The recommended percentage depends on the type of oil used: 20% with a single-coat, high-solids wax oil, and 10% with conventional floor oils, easy-to-apply oils or traditional wax oils. Adhering to these proportions ensures optimum resistance and reduces the time before the floor can be used again.

A compatible, high-performance formulation

Formulated in a solvent phase, this hardener is compatible with both traditional and modern oils. It enhances resistance to abrasion, stains and wear while preserving the natural appearance of the wood. It is particularly recommended for areas with high durability requirements, such as halls, galleries, exhibition rooms or public buildings.

An effective solution for demanding environments

Adding this hardener to finishing oils is a reliable solution for optimising the protection, longevity and appearance of parquet floors exposed to high stresses.

Preparation of the mixture

Before application, it is important to shake the oil container to homogenise its contents. The hardener is then added in the recommended proportions: 20% for high-solids oils and 10% for conventional oils such as those for parquet or oil-waxes. The mixture must be completely homogeneous before use.

Application of the mixture

The product is applied like a conventional oil, following the manufacturer's instructions. It is essential not to prepare more than can be applied in 45 to 60 minutes, as adding the hardener reduces the pot life to approximately 1 hour 30 minutes. The product should be applied to a clean, dry and dust-free surface at a temperature of at least 12°C.

Drying time

Drying takes place in a well-ventilated environment. It is generally faster than with oil alone, ranging from 1 to 2 hours at 23°C and 50% relative humidity. However, the time may vary depending on the product used and the ambient conditions, and will be longer in case of low temperature or high humidity.

Precautions for use

The hardener contains components that may cause irritation or allergic reactions. It is recommended to wear gloves, work in a well-ventilated area and clean tools immediately after use.

Important recommendation

It is best to mix only the amount of product needed for immediate application, as the hardener accelerates setting and limits the shelf life of the mixture.

The Oil Hardener 0.5L is in a solvent phase.

Non-contractual photo 📷

Please note that the photos of the parts are not to scale.

Oil Hardener 0.5L

Notice

Reviews about this Oil Hardener 0.5L (0 reviews)

There is no review for this item.