Polishing pad Ø180 grain 400

Polishing pad Ø180 grain 400

Polishing pad Ø180 grain 400 for the 4D monobrush

sold by unit

Polishing pad Ø180 grain 400: Use it dry on cement surfaces and with water on natural stone, marble and terrazzo. Thanks to its design and flexible backing, the Ø180 grit 400 Polishing Pad enables surfaces to be quickly sanded and polished to a uniform finish. It's the ideal solution for achieving semi-polished, satin or opaque finishes on smoothed concrete, particularly before applying densifiers and fillers.

Applications : 
A) Polished concrete surfaces, smoothed concrete, self-levelling cement coatings.
B) Restoration and polishing of marble, terrazzo and natural stone.

Use the Ø180 grit 400 polishing pad after using the 220 grit pad to remove excess densifier or hardener, leaving an opaque finish. At the same time, it removes marks and small scratches from natural stone surfaces.

Instructions for use: 
Dry system for polished concrete surfaces, helicopter-smoothed concrete and self-levelling cement coatings.
1. Start sanding with Pad grain 120 or 220 depending on concrete conditions.
2. Apply hardener for densification.
3. When the hardener is completely dry, use the Pad 800.

For daily cleaning of treated floors in high-traffic areas, use a high-speed single-brush machine.

Non contractual photo 📷
Please note that the photos of the parts do not use the same scale.