1. Preparing the surface
   • Check that the floor is clean, dry and perfectly smooth.
   • Level out any irregularities by filling in the surface if necessary.
   • Apply a primer for better adhesion.
2. Acclimatising the parquet
   • Leave the parquet to acclimatise in the room for 48 hours before laying.
3. Choosing the laying method
   • Decide on the right method: floating, glued or nailed, depending on the type of parquet and the support.
4. Deciding on the direction of installation
   • Install the boards in the direction of the light or parallel to the longest wall.
   • Do a dry run to visualise the result.
5. Installing the underlay
   • For floating installation, install an insulating underlay.
6. Laying the boards
   • Start against a wall, leaving an expansion gap of 8-10 mm.
   • Use shims to maintain this space.
   • Join the boards together by interlocking or gluing them, depending on the method chosen.
7. Adjustments and cutting
   • Use a suitable saw to adjust the boards to the contours of the room.
8. Finishing touches
   • Remove the expansion spacers.
   • Install the skirting boards and threshold bars.
9. Final check
   • Check the alignment and stability of the boards.
   • Make sure there are no gaps between the boards.

By following these key steps and taking the necessary time for each phase, you will guarantee perfect installation of the parquet, thus ensuring its longevity and appearance for your client.