Pigment wood stains Light Oak 1L
Pigment wood stains Light Oak 1L
Pigment wood stain Light Oak 1L: water-based Aqua-Polyurethane
Pigment wood stain Light Oak 1L, specially designed for parquet flooring, furniture, worktops and interior woodwork, this water- and pigment-based solution is ready to use. Suitable for all types of wood, it is easy and uniform to apply, without leaving marks or visible joins, making it particularly suitable for large surfaces.
This colour can be directly covered by any type of finish (glaze, oil or wax - solvent or water-based), without the need for a primer.
Furthermore, all the colours can be mixed together, offering an infinite range of possibilities for creating personalised shades.
ADVANTAGES
- Ready to use as soon as opened
- Ideal for large surfaces
- Application without leaving visible marks
- Directly recoatable, without the need for a primer
- Compatible with all types of finishes
- Applicable to all wood species
- Can be mixed with other colours
Approximate coverage (depending on the surface): 15 m² per litre per coat
Dust-free drying time: 15 to 30 mins. Can be covered after 8 hours.
PREPARATION
The Pigment wood stain Light Oak 1L should be applied to bare, clean, dry and sound wood.
- Parquet floors must be levelled by sanding.
- If there are joints between the boards, it is advisable to apply a wood putty binder beforehand to avoid over-colouring.
- New woodwork must be carefully sanded with 120-grit paper to ensure that the surface is as even as possible.
- The use of steel wool is not recommended (risk of corrosion stains).
APPLICATION
Before use, shake the Pigment wood stain Light Oak 1L thoroughly.
- Apply evenly with a brush, a spalter or a short-haired roller, working in small areas and in the direction of the wood.
- During application, wipe the surface gradually with a lint-free cotton cloth or use a single-brush machine with a beige pad for large surfaces. This method guarantees perfect homogeneity and ensures good adhesion of the finish.
- After about 8 hours of drying, apply the desired finish: sealer, varnish, oils or waxes. If applying a water-based sealer, varnish or oil, remember to sand lightly before applying the final coat.
- For a ‘white’ colour on tannic woods such as oak or chestnut, it is recommended, for professional use only, to add 20% Aqua Pro Blanchon Hardener to the wood stain.
- The recommended finishes are Iceberg Varnish or Biosourced Environmental Oil.
Make sure to keep it away from frost (be careful when storing in vehicles).
After use, carefully reseal the container.
Non-contractual photo 📷
Please note that the photos of the rooms are not to the same scale.
