Ø150mm velcro backing pad 8 holes
Ø150mm velcro backing pad 8 holes for light edger BLE Original Zéphyr
The Velcro base with a diameter of 150 mm and eight holes in a light edger Original Zéphyr is used to attach the abrasive disc to the machine support.
Functions
1. Fixing the abrasive disc: The Ø150mm velcro backing pad 8 holes is designed to allow the abrasive disc to be fixed to the edge sander. The Velcro surface adheres to the back of the abrasive disc, and the eight holes are generally used to allow dust to escape during sanding.
2. Dust extraction: The eight holes in the Velcro base allow dust generated during sanding to be sucked through the machine, helping to keep the work area clean and improving sanding efficiency.
When should the Ø150mm velcro backing pad 8 holes be replaced?
- Wear: If the Velcro surface shows signs of wear, such as discoloured areas, tears or reduced adhesion, it may need to be replaced.
- Physical damage: Physical damage, such as significant tears or deformation, can affect the base plate's ability to hold the abrasive disc firmly in place.
- Blocked holes: If the holes are blocked by dust debris or other particles, this may reduce the effectiveness of dust extraction. In this case, the backing pad may need to be replaced.
- Ineffective fastening: If the Ø150mm velcro backing pad 8 holes no longer holds the abrasive disc securely in place, this can cause problems during sanding and may require replacement.
- Regular inspection: Even if there are no obvious signs of wear, it is recommended to regularly check the condition of the Ø150mm velcro backing pad 8 holes and replace it periodically according to the manufacturer's recommendations.
It is important to consult Repex Floor Customer Service with the year of your edger model for specific information on maintenance, replacement and adjustment of the Ø150mm velcro backing pad 8 holes. The manufacturer's recommendations may vary depending on the model and year of manufacture of the machine.
In general, regular maintenance, visual inspection and replacement of worn parts will help to ensure that the edger works properly and prolong its service life.
Non-contractual photo 📷
Please note that the photos of the parts are not to scale.
