facebook

instagram

google

linkedin

Belt sanders, disc sanders, single-brush sanders,
abrasives, varnishes, spare parts…
for the pros
» » » » Multipurpose glue refill MS232 600ML

Multipurpose glue refill MS232 600ML

Reference -WA35177
Rating:0 opinion
5.15€ Excluding VAT

Multipurpose glue refill MS232 600ML WA35177

for applicator gun 50 réf WA035038

Quantity : 
+
-
Product available
CB Visa mastercard
maestro VisaElectron
Chronopost
Add to cart
Ask an estimate
Share :

Multipurpose glue refill MS232 600ML
Notice

Multipurpose glue refill MS232 600ML

Multipurpose glue refill MS232 600ML for 50 applicator gun

The Multipurpose glue refill MS232 600ML is a single-component, elastic MS-based adhesive with a structured viscosity that is ideal for laying various types of flooring, including mosaic flooring, strip flooring (with a minimum thickness of 16 mm and a maximum length of 200 mm), and English-style parquet flooring (up to 80 mm wide and 600 mm long), as well as multi-layer parquet flooring on absorbent and non-absorbent substrates indoors. WAKOL MS 232 adhesive meets the requirements of DIN EN ISO 17178.

Application

This adhesive is best applied with a notched trowel.

Consumption

- Approximately 550-725 ml/m² with replacement nozzles

- Approximately 500-800 ml/m² with a notched trowel for parquet flooring

Special properties

- Solvent-free according to TRGS 610

- Complies with DIN EN ISO 17178

- Optimised for use with adhesive applicators such as applicator 90

- Does not cause wood swelling due to its water content

Technical

- Raw material base: Modified silane polymer

- Air time: none

- Application time: approx. 40 minutes

- Setting time: approx. 24 hours

- Surface treatment: after at least 24 hours

- Storage time: 12 months in closed container

- Storage temperature: frost-resistant

Application instructions

Before application, ensure that the floor and ambient conditions comply with the information sheets and applicable standards. The substrates must be even, permanently dry, hard and free of cracks and substances that prevent adhesion.

It is recommended to clean the tools immediately after use with WA596002 cleaning cloths. After the setting time, the adhesive can only be removed mechanically.

Important instructions

- Do not use at floor temperatures below +15°C or ambient temperatures below +18°C.

- The indoor air humidity should preferably be between 40% and 65%, not exceeding 75%.

- Avoid applying the adhesive to parquet joints to prevent unwanted interactions with surface treatment products

 

For further technical advice, please do not hesitate to contact us.

Manufacturer's product sheet CLICK HERE

Safety data sheet CLICK HERE

Non-contractual photo 📷

Please note that the photos of the parts are not to scale.

Back to top
Multipurpose glue refill MS232 600ML
Notice

Reviews about this Multipurpose glue refill MS232 600ML (0 reviews)

There is no review for this item.
Back to top