Laying floor coverings can sometimes present challenges. Here are solutions to the most common issues encountered by craftsmen:

1. Uneven floor
   • Problem: Floors with irregularities greater than 2-3 mm can lead to visible defects and instability.
   • Solution: Check the flatness of the floor with an aluminium ruler. If necessary, carry out a levelling process or apply a suitable underlay to correct small irregularities.
2. Poorly laid first row
   • Problem: A poorly aligned first row can throw the entire installation off balance.
   • Solution: Draw a guide line on the floor and assemble the first two rows simultaneously to ensure perfect alignment. Make sure the walls are straight or compensate with shims if necessary.
3. Squeaking noises
   • Problem: Floating floors can squeak due to an unsuitable subfloor or incorrect humidity.
   • Solution: Use a quality foam underlay
4. Gaps between the boards
   • Problem: Gaps may appear due to the expansion or contraction of the wood.
   • Solution: Respect the expansion joints recommended by the manufacturer and acclimatise the materials in the room 48 hours before installation.
5. Forgetting the underlay
   • Problem: Skipping this stage can lead to problems with sound, heat or damp insulation.
   • Solution: Always lay a suitable underlay, perpendicular to the boards, to improve comfort and protect the covering.

By following this advice, you will guarantee a successful and long-lasting installation. For more information or personalised advice, contact our technical team!