Fast-curing repair resin MS335 0.6KG
Fast-curing repair resin MS335 0.6KG in metal pot
Fields of Application
MS335 repair resin is a fast-curing modified silane resin designed to fill cavities in wooden floors, regardless of the type of floor adhesive used.
Technical Characteristics
- Raw material base: Modified silane polymer
- Curing time: approx. 2 hours
- Storage temperature: frost-resistant
- Storage life: 12 months at room temperature
Applications
This fast-curing repair resin is ideal for filling cavities in parquet floors.
Specific properties
- Solvent-free according to TRGS 610
- Odourless
- Belongs to EMICODE EC1 PLUS class according to GEV criteria: very low emissions
- Suitable for floors with integrated heating
- Suitable for use with castor chairs
Application
1. Locate the cavities and apply a sufficient amount of resin around the drill hole to prevent contamination of the surface.
2. Drill the cavity vertically, making additional holes if necessary.
3. Add 50 ml of water to 600 ml of MS 335 and mix with a small mixer for at least one minute to obtain a homogeneous mass.
4. Inject the mixture into the cavity during the pot life of 15-20 minutes until it is sufficiently filled.
5. Allow to dry for approximately 2 hours. After this time, the drill hole can be properly filled using the usual methods.
Important Instructions for Use
- Do not use at ground temperatures below +15°C or ambient temperatures below +18°C.
- Maintain indoor humidity between 40% and 65%, without exceeding 75%.
- Preheat the products in a heated room before use in cold weather.
Instructions
Manufacturer's data sheet CLICK HERE
Safety data sheet CLICK HERE
If you have any further technical questions, please do not hesitate to contact us.
Non-contractual photo 📷
Please note that the photos of the parts are not to scale.
