Double belt

Double belt

for OURAGAN sander 

The double belt is an accessory used with the Ouragan sander. Its main function is to transfer power from the sander's motor to its sanding system. This belt is generally designed to drive two sanding elements, which makes for greater efficiency when sanding surfaces.

Double belt wear points :
1. Surface wear: The belt surface can wear over time due to continuous friction against the sanding discs. This can lead to a reduction in the efficiency of the sander and a reduction in sanding quality.

2. Tension: Belt tension must be maintained correctly to ensure optimum operation of the sander. If the belt becomes too loose or too taut, it can slip or break.

When to change the part :

The double belt must be replaced in the following cases:

1. When the belt surface shows significant signs of wear, such as cracks, fissures or smooth areas.
2. If the belt is damaged, torn or broken.
3. If the belt is slack or over-tensioned, affecting the smooth operation of the sander.

Replacing the double belt is essential to maintain the performance of the Ouragan sander and to obtain quality sanding results. A worn or damaged belt can cause problems with the operation of the machine and affect the quality of the sanding work. We recommend that you check the condition of the belt regularly and replace it as soon as any signs of wear or damage are noticed.

Non contractual photo 📷
Please note that the photos of the parts do not use the same scale.